3
Running A Control Solution Test
You need the meter, a test strip, and control solution
3.
Place the meter on a flat surface,
like a table.
4.
Remove the control solution bottle
cap and wipe the tip of the bottle
with a tissue.
1. If display stays at
or and no any setting is made, the test results will always
in
or
.
2. If you do not choose “CtL”, the test results will be included in the memory of blood
test.
1.
Put a test strip into the meter in
the direction of the arrow and the
icon of shows itself.
2.
Press twice to set
“CtL ”
and press to
confirm the setting.