ePropulsion SPIRIT 1.0R, Руководство пользователя

Страница: 27 / 48

25
Pairing the remote to the outboard:
Step 1
: Break the battery connection and turn off the remote control. Hold the
remote control within 0.5 meter of SPIRIT 1.0R (head part).
Step 2
: Press and hold the " " button to switch on.
Step 3
: Press and hold the " " button to enter the pairing page (Figure 5-3),
on which blinking " " , " " and a countdown timer " " will
display.
Figure 5-3
Step 4
: Plug the power cable into the battery power port, and wait the outboard
to finish automatic paring with the Remote. When pairing succeeds, the
screen will display like this.
Figure 5-4
If pairing fails within 60s, please restart from
Step 3
.
5.3 Power Adjusting
Attach the kill switch to the remote control before operation.
(Refer to the first two steps of 4.2 Starting ).
The remote control is mainly used to adjust power for the outboard motor.
When the battery is well connected and switched on, power on the remote
to start the outboard, then slowly push the throttle to adjust the power. The
maximum forward / backward power is 1KW.