ePropulsion NAVY Tiller Handle, Руководство пользователя

Страница: 14 / 30

12
Please follow the below steps to charge the Tiller Handle by wired
connection.
First, connect the Tiller Handle to the outboard motor by a communication
cable first (Figure 4-3);
Then, connect the outboard motor to the battery.
Figure 4-3
During long-term storage, ensure to charge the Tiller Handle battery
every 6 months to avoid over-discharge.
After long-term storage, charge the Tiller Handle before use.
The communication cable is not included in this package. Please
purchase one from your dealer if you choose this charging method.
It’s recommended to switch off the Tiller Handle while connecting
the communication cable. When the Tiller Handle is switched on
while charging, as the outboard main part and Tiller Handle are
in communication, the working outboard motor will stop once the
communication cable disconnects.
* The communication cable needs
to be purchased separately.
Communication Cable