Epple Maschinen SBS 32 400 V Скачать руководство пользователя страница 25

Страница: 25 / 33

26.01.07, SBS 32, Drills

Page 25 from 33

4.3.7 Activating

The machine is connected by using the on

– switch of the main switch (view

overview control elements electrical) at the control panel.
Push therefore shortly the green switch [I].

The drilling spindle starts with the chosen number of speeds.

4.3.8 Deactivating

If you push the red switch

[

]

„EMERGENCY STOP“

the drive gets

deactivated.

4.4

Hand drive

The machine only has the mode hand drive.

Activate the drive and accomplish the bore by guiding the feed lever.

4.5

Adjust depth arrester

The hub of the feed lever is built

– on as a depth stop.

Adjust the scale (2) at the desired drilling depth and brew
the clamping feast (1).

4.6

Table height adjustment



Declamp the table arrester (1)



Adjust the table with the crank (2) at the desired height



Clamp the table arrester (1)

4.7

Turn, swivel, tilt table

The table can be swiveled around the column, the table plate can be turned and
tilted. All axes adjustments are the same:



Declamp the arrester of the axis



Adjust the table as needed



Clamp the arrester of the axis

4.8

Machine light

The machine has an illumination at the working face. The switch therefore is
located at the face side of the drilling head.

Содержание SBS 32 400 V


































Результаты поиска

Содержание SBS 32 400 V

Отзывы:

Похожие инструкции для SBS 32 400 V

Бренды по названию

Популярные бренды

Epple Maschinen SBS 32 400 V, Руководство пользователя

Результаты поиска

Содержание SBS 32 400 V

Отзывы:

Похожие инструкции для SBS 32 400 V

Бренды по названию

Популярные бренды