
Features
EP-MVP3C/2
Page 2-1
Section 2
FEATURES
EP-MVP3C/2 Features:
•
Intel Pentium
®
Processor with MMX technology, AMD K6/K6-2/K6 III, Cyrix
6x86MX/MII, IDT C6 & Rise MP6 operating at 133 ~ 500 MHz with 321 ZIF
socket 7 provides scalability to accept faster Processors in the future. The board
is configured by an Easy-Setting-Dual-Jumper (E.S.D.J.) to match your CPU
clock speed.
•
Designed with VIA MVP3 AGPset.
•
Supports up to 384 MB of DRAM (minimum of 16 MB) on board, You can
use 168-pin DIMM x 3. It will automatically detect Extended Data Output
(EDO) DRAM at 66MHz only or Synchronous DRAM memory (SDRAM) at
66MHz or 100MHz (please see Section 3-2).
•
Supports (2) 16 bit ISA slots, (4) 32 bit PCI slots, (1) AGP slot and provides
(2) independent high performance PCI IDE interfaces capable of supporting
PIO Mode 3/4 and Ultra DMA 33/66(for EP-MVP3C2 only) devices.
The EP-MVP3C/2 supports (4) PCI Bus Master slots and a jumperless PCI
INT# control scheme which reduces configuration confusion when plugging in
PCI card(s).
ATA-66 HDD Tested & Recommended:
WD AC-313000
for EP-MVP3C2
IBM DJNA-370910
Fujitsu Mpd3043AT
Quantum CR8400AT
•
Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE
interfaces.
•
Designed with Winbond W83877TF Multi I/O: (1) floppy port, (1) parallel port
(EPP, ECP), and (2) serial ports (16550 Fast UART).
Note: Japanese “Floppy 3 mode” is also supported.
•
Built-in ATX 20-pin and AT 12-Pin power supply connector.
•
Features Award Plug & Play BIOS. With Flash Memory you can always
upgrade to the current BIOS as they are released. (http://www.epox.com
please visit our Technical Support section for the latest updates).
Содержание EP-MVP3C
