EPOX EP-GXB-M, Руководство пользователя

Страница: 54 / 90

EP-GXB-M Award BIOS Setup
Page 54
occurred.
• Standby Mode: When the standby mode timer times-out, it will enter the standby
mode and retain CPU at a slow working speed. The screen will be blanked out.
• Suspend Mode: This function works only when the Pentium II Processor is
installed. The timer starts to count when “System Standby” mode timer is timed
out and no “PM Events” are occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
Throttle Duty Cycle: Sets how much performance will be lost during a power
management mode. Default is 62.5%.
PCI/VGA Act-Monitor: Use this option if your monitor has advanced power saving
features. The default is Disabled
• Enabled: Your monitor’s power features will be included in power
management.
• Disabled: Your monitor’s power features will not be included in power manage-
ment.
Soft-Off by PWR-BTTN: Use this to select how the power switch will function.
The default is Instant Off.
• Instant Off: Turns off the power instantly when the power switch is pressed.
• 4 Second Delay: Turns off after a 4 second delay. If the power switch is pressed
and held for less than 4 seconds the system will go into Suspend Mode. Press
again to take system out of Suspend Mode.
CPUFAN Off In Suspend: This option is used to set if the CPU fans will turn off
during suspend mode. The default is Enabled.
• Enabled: The system will turn off the CPU fans during suspend mode.
• Disabled: The system will not turn off the CPU fan during suspend mode.
Power Loss Recovery: If the power to the system is cut off the system will turn
itself back on with no user intervention if this option is enabled. The default is
Disabled.
• Enabled: The system will power back on after a power interruption.
• Disabled: The system will stay off after a power interruption.
Power On by Ring: This option is used to set the remote ring in and Wake on LAN
(WOL) features. The default is Enabled.