EPOX EP-6ZXM, Руководство пользователя, Страница: 53 / 76

BIOS
EP-6ZXM
Page 4-23
RxD, RxD Active: This field configures the receive and transmit signals generated
from the IR port. The default is Hi Lo (when UART Mode Select is not set to
Normal).
Options: Hi Hi, Hi Lo, Lo Hi, and Lo Lo.
IR Transmitting delay: The default is Enabled (when UART Mode Select is not
set to Normal).
Options: Enabled and Disabled.
Onboard Parallel port: This field allows the user to configure the LPT port.
The default is 378H / IRQ7.
378H:
Enable Onboard LPT port and address is 378H and IRQ7.
278H: Enable Onboard LPT port and address is 278H and IRQ5.
3BCH: Enable Onboard LPT port and address is 3BCH and IRQ7.
Disabled: Disable Onboard Winbond Chip’s LPT port.
Parallel Port Mode: This field allows the user to select the parallel port mode.
The default is ECP+EPP.
Normal: Standard mode. IBM PC/AT Compatible bidirectional parallel port.
EPP: Enhanced Parallel Port mode.
ECP: Extended Capabilities Port mode.
EPP+ECP: ECP Mode & EPP Mode.
ECP Mode USE DMA: This field allows the user to select DMA1 or DMA3 for
the ECP mode. The default is DMA3.
DMA1:
This field selects the routing of DMA1 for the ECP mode.
DMA3: This field selects the routing of DMA3 for the ECP mode.
ECP Mode Select: This item allows you to determine the IR transfer mode of
onboard I/O chip.
options: EPP1.9, EPP1.7.