background image

BIOS

EP-61BXC-A

Page 4-11

Delayed Transaction:   This option allows the chipset to use its embedded 32-bit
posted write buffer to support delay transactions cycles.
The default is Disabled.

Enabled:  Select enabled to support PCI 2.1 specification.
Disabled:  Disabled.

AGP Aperture Size:  The amount of system memory that the AGP card is allowed
to share.
The default is 64.

4: 4MB of systems memory accessable by the AGP card.
8:  8MB of systems memory accessable by the AGP card.
16:  16MB of systems memory accessable by the AGP card.
32: 32MB of systems memory accessable by the AGP card.
64:  64MB of systems memory accessable by the AGP card.
128:  128MB of systems memory accessable by the AGP card.
256:  256MB of systems memory accessable by the AGP card.

Auto Detect DIMM/PCI Clk:  Allows you to stop DIMM/PCI Clock drive when
the DIMM site or PCI Slot are not plug. This item may help reduce EMI.

The default is Enabled.

Enabled: Provides unused DIMM/PCI to stop.
Disabled: Provides the clock generator always driving.

Spread Spectrum Modulated:  Allows you to active the Spread Spectrum Modula-
tion function for reduce EMI. (Note: When Enabled the item that performance will
be impacted).

The default is Enabled.

Enabled: Provides the Spread Spectrum function from clock generator.
Disabled: NO Spread Spectrum function.

CPU Warning Temperature:  This is the temperature that the computer will
respond to an overheating CPU.
The default is Disabled.

Enabled:  Temperature is monitored on the CPU
Disabled:  This feature is turned off.

Current CPU Temperature:  This is the current temperature of the CPU.

Current Power FAN Speed:  The current power fan speed in RPMs.

Содержание EP-61BXC-A













































































Отзывы: