background image

BIOS

EP-3WXM/2/4

Page 4-14

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and

you have USB peripherals.

The choice: Enabled, Disabled.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and

you have a USB keyboard.

The choice: Enabled, Disabled.

Init Display First

This item allows you to decide to active whether PCI Slot or on-chip VGA first

The choice: PCI Slot, Onboard .

AC97 Audio/Modem

This item allows you to decide to enable/disable the 810 chipset family to support

AC97 Audio/Modem.

Select Enable of AC97 Modem item, you must be secondary Modem Riser Card

(MR) in hardware.

The choice: Enabled, Disabled.

IDE HDD Block Mode

Block mode is also called block transfer, multiple commands, or multiple sector

read/write.  If your IDE hard drive supports block mode (most new drives do), select

Enabled for automatic detection of the optimal number of block read/writes per

sector the drive can support.

The choice: Enabled, Disabled

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC) installed on the

system board and you wish to use it.  If you install and-in FDC or the system has no

floppy drive, select Disabled in this field.

The choice: Enabled, Disabled.

Onboard Serial Port 1/Port 2

Select an address and corresponding interrupt for the first and second serial ports.

The choice: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.

Содержание EP-3WXM





































































Отзывы: