EPOX EP-3VHA, Руководство пользователя

Страница: 38 / 73

BIOS
Page 4-15
HDD Power Down: When enabled and after the set time of system inactivity, the
hard disk drive will be powered down while all other devices remain active.
The choice: Enabled, Disabled.
Suspend Mode: When enabled and after the set time of system inactivity, all
devices except the CPU will be shut off.
The choice: Enabled, Disabled.
Video Off Option : Tells you what time frame that the video will be disabled under
current power management settings. The default is Suspend->Off.
Always On : Video power off not controlled by power management.
Suspend->Off : Video powers off after time shown in suspend mode setting.
Video Off Method : This option allows you to select how the video will be disabled
by the power management. The default is V/H Sync + Blank
V/H Sync + Blank : System turns off vertical and horizontal synchronization ports
and writes blanks to the video buffer.
DPMS Support : Select this option if your monitor supports the Display Power
Management Signaling (DPMS) standard of the Video
Electronics Standards Association (VESA). Use the software
supplied for your video subsystem to select video power
management values.
Blank Screen : System only writes blanks to the video buffer.
MODEM Use IRQ : Name the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens the system.
Default is IRQ 3.
The Choice: N/A, 3, 4, 5, 7, 9, 10, 11
Soft-Off by PWRBTN : Use this to select your soft-off function.
The default is Instant Off.
Instant Off : Turns off the system instantly.
Delay 4 Second : Turns off the system after a 4 second delay. If momentary press
of button, the system will go into Suspend Mode. Press the
power botton again to make system back to work.