manualshive.com logo in svg

EPOX EP-3VBM+, Руководство пользователя, Страница: 3 / 71

Поделиться
Скачать
EPOX EP-3VBM+ Скачать руководство пользователя страница 3

EP-3VBM+

Technical Support Services

If you need additional information, help during installation or normal use of this
product, please contact your retailer.  Your retailer will have the most current informa-
tion about your configuration.  If your retailer cannot help, you may visit our online
technical support website and/or contact our support technicians at the locations listed
below.

Record your serial number before installing your EP-3VBM+ mainboard.  (The serial
number is located near the ISA slots at the edge of the board.)

EP-3VBM+ serial number:  _________________________________

Contacting Technical Support

EPoX technical support is working hard to answer all of your questions online. From
our website you can find answers to many common questions, drivers, BIOS updates,
tech notes, and important technical bulletins.  If you are still unable to locate the
solution you are seeking, you always have the option to contact our support technicians
directly.

North American website (English language)

http://www.epox.com
[email protected]
[email protected]

European website (Multi-language)

http://www.epox.nl
[email protected]
[email protected]

Taiwan website (Chinese language)

http://www.epox.com.tw
[email protected]
[email protected]

Thank you for using EPoX mainboards!

Copyright 1999 EPoX Computer Company.  All rights reserved.

Содержание EP-3VBM+








































































Отзывы:

Нет отзывов