manualshive.com logo in svg

EPOX EP-3VBA, Руководство пользователя, Страница: 36 / 63

Поделиться
Скачать
EPOX EP-3VBA Скачать руководство пользователя страница 36

BIOS

EP-3VBA

Page 4-14

VGA:

When set to On (default), any event occurring at a VGA port will awaken a
system which has been powered down.

LPT & COM:

When set to On (default), any event occurring at a COM(serial)/LPT (printer)
port will awaken a system which has been powered down.

HDD & FDD:

When set to On (default), any event occurring at a hard or floppy drive port
will awaken a system which has been powered down.

DMA/master:

When set to On (default), any event occurring to the DMA controller will
awaken a system which has been powered down.

RTA Alarm Resume:

When set to Enable rta alarm resume, you could set the date (of month) and
timer (hh:mm:ss), any event occurring at will awaken a system which has been
powered down.

Modem Ring Resume:

When set to Enabled, any event occurring to the Modem Ring will awaken a
system which has been powered down.

Primary INTR:

When set to On (default), any event occurring at will awaken a system which
has been powered down.

Содержание EP-3VBA
































































Отзывы:

Нет отзывов