Installation
BXB
Page
5
Easy Installation Procedure
Easy Installation Procedure
The following must be completed before powering on your new system:
Configure Jumpers to match your hardware
Install memory chips
Device Connectors
Device Connectors
Adaptec SCSI setup
Configure Jumpers
2theMax
designs all motherboards with the fewest jumpers to make your setup fast and
easy.
The following will describe all of the jumpers that are required to be set before
moving on to step 2.
Note: The jumpers as shown in Figure 1 are in their correct physical
orientation.
CMOS Clear
JP1:
=
1-2 - Run Mode (Default)
=
2-3 - Clear CMOS
JP1:
1
JP13:
1
Keyboard Power-ON function (see page 3-12)
JP13:
=
1-2 - Enable
=
2-3 - Disable (Default)
J1:
J7:
SB-LINK Header:
Reserved for Creative Labs AWE64D PCI sound card
which allows for DOS mode compatibility.
WOL (Wake On Lan):
Reserved for NIC (Network Interface Card) which when
used with compatible software will allow the system to be
powered on remotely using a network connection.
