Installation
3VBA
Page
7
Power On/Off - This is connected to the power button on the case.
Using the Soft-Off by Pwr-BTTN feature, you can choose either
Instant Off (turns system off
immediately
), or 4 sec delay (you need
to hold the button down for 4 seconds before the system turns off).
When the system is in 4 sec delay mode, we has added a special
feature to make the system go into suspend mode when the button
is pressed momentarily.
J2
Device Connectors
(continued)
Speaker - Connect to the system's speaker for beeping
1. Speaker
3. GND
2. N/C
4. GND
Reset - Closed to restart system.
Turbo LED indicator - LED ON when higher speed is selected
IR Connector
1. VCC
4. GND
2. NC
5. IRTX
3. IRRX
IDE LED indicator - LED ON when Onboard PCI IDE Hard
disks is activate
Power LED connector
1. Power LED(+)
4. NC
2. N/C
5. GND
3. GND
J3
1
+
+
1
1
