EPOS ELS 3 Скачать руководство пользователя страница 2

position within your listening
room. Begin by positioning the
loudspeakers about 20cm
(8”)from the rear wall and
gradually move them out a little
until you achieve the best balance
between bass weight and
definition.

Avoid placing the loudspeakers in
corners because this may cause
un-welcome colouration of the
midband frequencies. Try to leave
at least 40cm of space between
each loudspeaker and the
nearest side wall.

The optimum stereo performance
will be achieved when the
speakers are positioned 2.5
metres (8’) or more from the
listener and about the same
distance from one another.
Turning the speakers in very
slightly towards the listener often
helps to stabilise the stereo
image.  

Speakers ‘image’ best if you can
just see the top face of the
speaker from your listening
position.  Remember, there is no
absolute right or wrong - if it
sounds good, it is good.

STANDS

The best results will be obtained
from the ELS 3 if they are placed
on  stands rigidly coupled to the
floor using carpet piercing spikes.
This will help preserve the
outstanding midband clarity which
is a hallmark of Epos
loudspeakers.

Epos stands are available to
match the ELS 3. Please contact
your dealer for further information
or visit the Epos web site:

www.epos-acoustics.com 

CONNECTION

Ensure that your amplifier is
switched off before you make or
break any connections, as it may
damage may occur if shorted.

Your Epos loudspeakers are
equipped with high quality
connection sockets with excellent
electrical contact and current
specification. 

A set of 4 plugs is supplied which
will allow you to terminate your
loudspeaker cables. To terminate
your cables, simply remove
enough insulation to allow the 

Содержание ELS 3









Отзывы: