Epoch X4 Touch, Инструкция по эксплуатации

Страница: 12 / 15

After putting multiple batteries, click the battery icon which one the
users want to check; the battery icon turns red, and all the information
at the top of the main interface is the information of the selected slot
.
5) Change settings:
If users want to change the setting, there are two ways:
①
When putting the battery, waiting for 8 seconds, click the battery icon.
(Note: For Ni-MH batteries, charging current must be within 8 seconds.
If there is no operation within 8 seconds, then charge in the default
current and the current cannot be changed during charging.)
②
During the charging process, select the battery icon which need to
change settings and click the battery icon again to enter the setting
interface.
BATTERY ACTIVATION
For every installed battery, the X4 Touch will activate the battery by
charging it. Activate automatically for Li-ion batteries with protection board,
which are instantaneous short circuit. For the unprotected batteries’ voltage
is above 0.2V, the activation methods are as follows:
A. Put the batteries in the X4 Touch. (During the process, it is normal that