King
Full / Queen
3
2
Spread the slat bundle, strap side down, evenly across the side rails. Then use a Phillips head screwdriver
and the 30mm wood screws to secure the first slat on one end of the bed and the last slat other end.
Finally, screw the remaining slats to the platform. *A power drill set to low torque with a Phillips head
extender may be useful in this step.
Attach the center support rail(s) to the center support brackets using the 15mm wood screws.
Make sure the platform for slat attachment
is facing the inside of the bed. Then slide
one side rail into the slots of the headboard.
Repeat this process with the other side rail.
Next do the same with
the other end of the side
rails into the footboard.
Gently tap the top of the rail ends with a rubber mallet
to make sure the connections are secure.
Have a question? Need a part ASAP? Call 1-800-589-7990 or email [email protected]
1
SLAT R
A
IL P
L
AT
F
O
RM
31-May-2018
2
/
2
