Next use a Phillips head screwdriver to sink two 30 mm wood
screws through the bracket and into the bottom of the tray
R
.
Have a question? Need a part ASAP? Please call 1-800-589-7990 (Monday through Friday 9am to 5pm PST).
Hang the alarm clock
tray
S
anywhere along
the top side rails.
Hang the printer/CPU
tray
R
anywhere along
the bottom rails.
**NOTE:
To reposition trays remove
trays completely and
gently reposition to avoid
scratching finish.
Attach the three wire organizer baskets
T
,
U
,
V
, to the pegboard as desired by
tilting the basket and inserting the prongs into the holes and push the basket back
down to a level position to secure the basket to the pegboard (See diagram
XIX
).
Install the
L
bracket in the predrilled holes underneath the desk
and behind the ladder/safety rail assembly using two 15 mm
wood screws and a Phillips head screwdriver (See diagram
XVII
).
XVIII
XVII
XIX
Locate the corkboard
P
and pegboard
Q
.
Make sure the spring loaded pins are at
the top of each backboard. Push the pins
flush to the backboard and insert the
backboard into the grooved rails on the
loft (See diagram
XVIII
).
17
14
Attach the two printer/CPU
brackets to the tray
R
using two
40 mm bolts that go through the
back of the tray. Tighten with the
hex key provided.
2-Aug-2018
5/5
