Have a question? Need a part ASAP? Call 1-800-589-7990
12) To use the bottom bed as a storage drawer, simply
remove the mattress and insert the four wire retainers
as shown above. Slide the drawer partitions into the
wire retainers down the grooves on the partitions.
11) Roll the lower bed under the upper bed. Now use the hex
key to re-tighten all bolts so that the bed assembly is
rigid. It may be necessary to re-tighten bolts after wood
has acclimated to your weather region. You are now
ready to enjoy your trundle bed.
10) Unroll the slat bundle (strap side down) and
spread out from end to end of bed. Now attach
each slat to the side rail with the 32 slat screws
provided (H).
9) Now flip the lower bed back over and lay the three
bottom planks into the bed. The top side of the planks
will have countersunk holes for the screws. Insert and
tighten the eight screws on each plank.
G
8) Attach casters to bottom of bed using two screws
for each caster (G). Notice the casters are located
on the inside of each rail.
7) On a soft surface (carpet or cardboard box) carefully flip
over the bottom bed.
