Epoch Design Dakota Twin 5103 Скачать руководство пользователя страница 4

Страница: 4 / 4

Insert full mattress retaining board between

the headboard and the wooden block on

the end of the side rail.

Repeat for footboard.

Insert a bunk

connector pin into

each of the four

holes on the

bottom end boards.

With the assistance

of another person

place the upper

bunk on top of the

lower bunk.

Attach ladder to side rail of upper

bunk. Now use the hex key to

retighten all bolts so that bunk bed

assembly is rigid.

Be sure to periodically tighten

hardware, as it may loosen with

usage and changing humidity.

If desired, you may

permanently affix the ladder

with two 15mm wood screws.

**Note:

Do not affix ladder if you have purchased under bunk drawer.

Have a question? Need a part ASAP? Call 1-800-589-7990 or email [email protected]

31-May-2018

4/4

Содержание Dakota Twin 5103

Страница 1: ...d other components are in their proper positions free from damage and that all connectors are tight Do not use substitute parts Contact manufacturer or dealer for replacement parts The use of a water...

Страница 2: ...fety rails to bunk 2x Upper end boards Used on upper bunk 2x Lower end boards Used on lower bunk 2x Side rails Used to connect the upper end boards 2x Side rails Used to connect the lower end boards 1...

Страница 3: ...ead screwdriver Secure the slats to the side ledges with 30mm slat screws using a Phillips head screwdriver Note Apower screwdriver with clutch set on low is useful here Insert mattress retaining boar...

Страница 4: ...p of the lower bunk Attach ladder to side rail of upper bunk Now use the hex key to retighten all bolts so that bunk bed assembly is rigid Be sure to periodically tighten hardware as it may loosen wit...