EPK Phase 45, Руководство по эксплуатации

Страница: 8 / 9

Building Tips
5- Pay attention to the parts that have a polarity and make sure they are
connected as in the component placement picture:
- ICs (they have a small dot or indication that must fit the indication in
the board
- Electrolytic capacitors (longer pin is connected to the “+” hole):
- Diodes (check for the mark and make it fit with the one in the PCB):
- Leds (longer pin is connected to the “+” hole)
-
Transistors
(inserted to fit the drawing in the PCB)
To avoid any issue, check the latest building manual. Use the pictures only as
a reference! Colors/shapes can change slightly, always check the part polarity,
resistor values, potentiometer placement… before soldering.