EPK Distortion Plus, Руководство по эксплуатации

Страница: 9 / 10

Building Tips
6- With the kit we include plastic PCB supports with an adhesive bottom. You
can use them to anchor the PCB to your enclosure for a better stability.
Just insert the PCB support tip into the 3.5mm holes and remove the
adhesive protective film.
To avoid any issue always check the latest building manual. Use the pictures
only as a reference! Colors/shapes of wires, PCB or parts can change slightly,
this doesn’t affect their functionality in any way.
Always double check part polarity, resistor and capacitor values,
potentiometer placement, IC orientation… before soldering.