Episode ES-SNDBR-2.1-BLK, Руководство по установке

Страница: 6 / 8

page | 6
SETUP
Soundbar Placement
Placement should be below a flat screen TV on a cabinet top or shelf for most applications. Other options for placement
include on-wall using the included bracket, or attached to a flat panel mount using the optional Strong mount bracket.
Installing On or In a Cabinet
Note: When placing the soundbar on a cabinet shelf, the front edge of the speaker should be flush with the front of
the shelf. Placing the speaker further back on the shelf will degrade the sound quality of the speaker.
Mounting on a Wall
Considerations for Wall Mounting
Installing the soundbar more than 3 " from the screen may delay the audio from the video and provide a poor
listening experience. The soundbar should be as close to the TV as possible for best listening experience.
Attaching the Wall Bracket
1. Mark the position of the bottom of the TV.
2. Mark the position of the TV’s center point.
3. Remove the TV from the mount if necessary.
4. Locate wall studs using a stud finder (not included).
5. Place the bracket on the wall with the flat side toward the wall and the notched center mark facing up. The
Soundbar center mark should be located at the center point of the installed television.
6. Position the bracket vertical center “V” groove 2-1/8 " from the bottom of the TV. The Soundbar will hang flush
with the bottom of the TV once installed.
7.
Level the bracket and attach it to the wall studs using the horizontal screwhole slots. Use all 4 screws and keep
the bracket securely attached and flush with the wall.
Note: If wall studs cannot be used, wall mollies or anchors with the appropriate weight rating for the
soundbar should be used.
8. Clip the Soundbar onto the bracket, and center by adjusting left to right.
Installing on a Flat Panel Mount
The Episode 2.1 Soundbar can be mounted directly to a Flat Panel Mount with the Strong™ SM-SBAR-BKT (available
separately). Using the Flat Panel mount bracket allows the Soundbar to move with the TV when mounted to
articulating arm mounts. This provides an optimal listening experience for these installations.
Subwoofer Placement
Subwoofer placement can have an effect on performance. All rooms are different, but the strongest output will likely
occur if the subwoofer is placed in a corner of the room on the same wall as the soundbar. This is known as the
boundary effect and will emphasize certain bass frequencies while canceling others. Some listeners find this to be the
best sounding result, while others find it “boomy” or muddy. Experiment with available placement options and use the
tuning instructions in the FINE TUNE section of this manual.
Programming the Remote
1. Connect power to the soundbar, then press the power button.
2. Press and hold MUTE on soundbar until the LED flashes yellow.
3. Press the button on the soundbar that will be programmed once (MUTE, VOLUME UP, VOLUME DOWN). LED
will now be solid yellow.
On Cabinet In Cabinet