background image

page | 5

© 2019 Episode®

INSTALLATION

SPEAKER PLACEMENT

The Episode Expandable Soundbar is designed to be the Left, Center, and Right speakers of a home theater surround 

system. For most applications, placement should be above or below a flat screen TV either mounted to the wall using 

the included rail system or to the TV / Flat Panel mount using the optional Strong mount bracket. The soundbar can 

also be pre-assembled to the rail system and placed on a cabinet top or shelf. Note that if the soundbar is not placed 

within close proximity to the TV that there could be lip sync delay.

 

INSTALLING ON OR IN A CABINET

Considerations for Placement

When placing the Soundbar on a cabinet shelf, the front edge of the speaker should be flush with the front of the 

shelf. Placing the speaker further back on the shelf will degrade the sound quality of the speaker. 

 CONSIDERATIONS FOR WALL MOUNTING

To maintain a high level listening experience, the soundbar should be as close to the TV as possible. Keep in mind 

when installing the soundbar that placing the soundbar more than 3" from the screen will separate the audio from 

the video and provide a poor viewing and listening experience. 

70

"

50

"

Содержание ES-EXP-SNDBAR-M-BLK













Отзывы: