Episode ECS-500-AW70V-4, Руководство по установке, Страница: 5 / 12

page | 5
© 2017 Episode®
INSTALLATION
MOUNTING
The ES-AW-X speakers are supplied with
a U-shaped wall mounting bracket that
can be installed vertically, horizontally
or under eaves. Use screws, bolts, or
anchors (not included) that are capable of
supporting the weight of the speaker (see
illustration) to mount the bracket.
Once the bracket is mounted, loosen
the retention knobs on both side of the
speaker and slide the speaker onto the
bracket until it clicks into place, then
tighten the knobs to secure.
Bolt
Bracket
Retention
Knob
Loosen
Retention
Knob
Adjust
Speaker
Angle
Retention
Knob Cap
Security
Screw
SECURITY
Once the speaker is in the desired position and
secured, insert the included safety screw. Remove
the cap on the retention knob to access it. Replace
the cap once the security screw is tightened.
ANGLE ADJUSTMENT
To adjust the speaker angle, loosen both retention
knobs on the sides of the speaker, rotate the
speaker to the desired angle, then tighten the
retention knobs to secure. The speaker does not
need to be removed from the bracket and will be
supported by the bracket during adjustment.