Episode ECA-70MIXAMP-1-120, Руководство пользователя

Страница: 11 / 16

Cascading Amplifiers
Multiple ECA-70MIXAMP-1-120 can be used in a system where more audio distribution is needed. This is achieved by using the
unbalanced Rec Line Out to send the signal from Amp1 to the additional amplifiers.
1. Connect the Rec Line Out of Amp1 to a Source on Amp2.
2. Set the gain for the source used to Max, allowing for the volume from Amp1 mics/sources to be at the highest level.
3. Repeat for additional amplifiers.
4. Adjust the tone of Amp1 and then adjust the additional amps in order (Amp1, Amp2, etc.).
Note: The Rec Line Out is effected by Bass and Treble controls; adjust the tone of Amp1 first and then adjust the tone of the additional amplifiers.
ECA-70MIXAMP-1-120 Installation Manual
pg. 11
© 2012 Episode®