Episode EA-WAKE-2D, Руководство пользователя

Страница: 9 / 10

9
5. All LEDs slowly blink pink. The unit is validating the stored factory default firmware file.
6. All LEDs quickly blink pink. The unit is reprogramming the processor memory.
7. LED 1 blinks pink. The unit is reprogramming the Bluetooth module.
8. LED 1 blinks blue. The unit is ready to use.
Restarting the WAKE Amp
Press and hold the button. Continue holding while LEDs 1-5 start blinking blue, then release
the button when they start blinking red.
Note: If you continue to hold the button, the LEDs stop blinking. Releasing the button after this
time has no effect and you’ll have to try again.
Specifications
Input Voltage 100V - 240V
Power Consumption for Power
Supply
1.5A
Power Output 60W
Output Voltage 15V
Power Consumption 4A
Channels 2
Power Output @ 4 ohms 25W/Ch
Frequency Response 20Hz - 20kHz
Wireless Protocols Bluetooth Class 1/BLE
Range Up to 30m*
Installation Compatible with deep and backless single-gang plastic back boxes
Dimensions (W x H x D) 101.7 mm (4”) x 38.5 mm (1.5”) x 81mm (3.2”)
Weight 114 g (.25 lb)
*Varies depending on the Bluetooth source.