WIRING INSTRUCTIONS
The ES-MR-SSCV-6 connectors accept 18AWG to 12 AWG speaker wire for a variety of applications
.
You should always install speaker wire that is CL2 or CL3 rated when running it through walls.
Tip: Label all wires from each room and record which pair is connected to which zone before proceeding.
1. Turn off all equipment before making connections.
2. Lay out all wire runs from each speaker location and the receiver to the selector.
3. Remove the connectors from the selector.
4. Strip the wire no more than 1/4”, making sure all the
connections are secure and not shorting together at
the appropriate connector screw down terminal. Ensure
all strands of bare wire are completely inserted into the
connector properly, and that no loose strands are shorting
outside the connector. Any loose strands could possibly
touch another wire and short the receiver’s output.
5. If connecting to a receiver that has both A & B outputs,
connect the EA-MR-SSVC-6 to the receiver’s “A” output.
6. After you have tightened the screw terminals and securing the wires, insert the connector block back
into the selector as shown.
7. Connect the other end of the wire to the appropriate speaker locations. Observe the color coding
and speaker polarity, and securely connect the wire so that the speaker wire is not shorting anywhere
at the speaker connection.
WELCOME TO EPISODE
®
Episode
®
is one of the most highly regarded brands in custom electronics available today.
We appreciate your business and we stand committed to providing our customers with the highest
degree of quality and service in the industry.
INTRODUCTION
The EA-MR-SSVC-6 is a resistor-based, impedance-matching speaker selector with independent volume
controls. It offers 6 independent volume controls from one convenient location. Additionally, each pair of
speakers can be selected On or Off independently in any combination without concern for amplifier
impedance loading.
FEATURES AND BENEFITS
• Safely connect and control up to six speaker pairs with one amplifier
• Built- in automatic impedance protection circuitry engages without confusing buttons, switches or jumpers
• Individual zone On/Off control via the front mounted push buttons
• Individual zone Volume control via the front mounted 12 position rotary controls
• Detachable screw-type connectors, accepting 18 to 12 AWG speaker wire, provide sturdy hookup
to input and output wires
• Isolated left/right circuit grounds provide safe connection for amplifiers with floating grounds
or bridged configuration
• High-quality construction provides excellent reliability, accurate switching, and noise-free volume control
• Rubber feet prevent scratching and keep selector in place during operation
• Ideal for residential and light commercial applications where central control of all rooms is required
