www.SnapAV.com | Support: 866.838.5052
EA-MINI-2D-35 EA-MINI-3D-35
IR Command Learning Procedure
Command Learning Order (
Must be learned in this order!
)
Tools Required
*It is not necessary to wait for the pictured sequence of short blue flashes before entering each
code. These flashes only indicate which code is being learned.
Learning Errors
Command
Description
1.
Power Toggle ( )
Turn amplifier power on and off.
2.
Volume Up (V+)
Turn volume up (louder).
3.
Volume Down (V-)
Turn volume down (quieter).
4.
Mute Toggle ( )
Toggle mute mode (no volume) on and off.
5.
Input Toggle ( )
Switch between inputs 1 and 2.
A red LED indicates a learning error. After an error, repeat the current command until it learns correctly. See the
example below:
Page 2/2
LED:
Return DIP switch 2 to RUN (UP) using the tweaker. Learning Complete.
Flip DIP switch 2 DOWN with the tweaker to enter IR Learning Mode.
PINK
BLUE
RUN Mode ... DIP Switch 2: LEARN (DOWN)
Learning Mode, awaiting Command ...
Re-enter command
PINK
LED:
Ok. Power Learned
Press
Press
BLUE
BLUE
LED:
PINK
Ok. V+ Learned
Press
Press
BLUE
BLUE
V+
V+
Press
Press
LED:
V-
V-
PINK
Ok. V- Learned
BLUE
BLUE
1. Learn Power Toggle ( )
2. Learn Volume Up ( V+ )
3. Learn Volume Down ( V- )
4. Learn Mute Toggle ( )
Press
Press
LED:
PINK
BLUE
BLUE
Ok. Mute Learned
PINK
BLUE
BLUE
Ok. Input Toggle Learned
Press
Press
LED:
Tweaker Screwdriver
(required tool for DIP Switch)
Instructions
131017-1630
5. Learn Input Toggle ( )
