page | 3
© 2015 Episode®
OVERVIEW
This protocol provides the information required to control an EA-AMP-SUB-1D-500R amplifier via IR through a
connected IR receiver or Automation System. Follow the instructions carefully to ensure that IR will function at the
highest level, and not cause damage to the amplifier or other components.
IR CONNECTIONS AND SETUP
IR Connections and Controls
Connect an IR Receiver via IR repeater. Connect the IR repeater to the IR port on the amplifier with a 3.5mm mono
mini cable.
IR APPLICATIONS
In-Room IR Receiver with IR Remote
To control the amplifier with an in-room IR remote (commands transmit directly from the remote):
1.
Connect an IR receiver via IR repeater.
2.
Connect the IR repeater to the IR port on the amplifier with a 3.5mm mono mini cable.
3.
Position the receiver so that commands are received reliably.
4.
Control additional equipment by attaching an IR flasher to the IR Out port
of the repeater.
HDMI
HDMI
IR Ou
1
2
Emitter
Power IR IN
tputs
RS232
IR Inputs
IN
R
L
(LFE)
OUT
OUT
IN
IR
UPDATE
OPERATE
TRIGGER
DC 12V
IN
R
L
(LFE)
OUT
OUT
IN
IR
UPDATE
OPERATE
TRIGGER
DC 12V
Programmed Automation Controller
To control the amplifier with a control system:
1.
Connect a 3.5mm mono mini cable from the flasher output of the controller to the IR In port on the amplifier.
2.
Program the control system using the IR control protocol.
HDMI
HDMI
IR Ou
1
2
Emitter
Power IR IN
tputs
RS232
IR Inputs
IN
R
L
(LFE)
OUT
OUT
IN
IR
UPDATE
OPERATE
TRIGGER
DC 12V
IN
R
L
(LFE)
OUT
OUT
IN
IR
UPDATE
OPERATE
TRIGGER
DC 12V
© 2015 Episode®
3.5mm Mono Mini
3.5mm Mono Mini
AV Receiver
AV Receiver
IR Receiver
IR Receiver
IR Repeater
Control System
Power Cord
Power Cord
EA-AMP-SUB-1D-500R
EA-AMP-SUB-1D-500R
IR Repeater Connections
Control System Connections
