110309
Continuous Power Output
All channels driven
50 watts RMS at 8 ohms
70 watts RMS at 4 ohms
Bridged Power Output
All channels driven
140 Watts per channel RMS at 8 ohms
Note: Maintain 8 ohm minimum when using bridge mode
Input Sensitivity
500mV
Input Impedance
20,000 ohms
S/N ratio
95 dB
Frequency Response
20 Hz to 20 kHz
Distortion (Unbridged)
0.1% THD 20 Hz-20 kHz
Distortion (Bridged)
0.1% THD 20 Hz-20 kHz
Dimensions
17”w x 4”h (including feet) x 13” deep
Weight
32 lbs.
Certification
Meets FCC Part 15, ETL Listed and tested under UL/EN60065
*All specifications are subject to change without notice
SPECIFICATIONS
WARRANTY
2-Year Limited Warranty
Episode
®
Amplifier Products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty
must be returned to SnapAV or a designated service center with prior notification and an assigned return
authorization number (RA).
