Episode CR-CDI1000-LSCAPE, Быстрый старт

Страница: 3 / 8

page | 3
© 2016 Episode®
WELCOME TO EPISODE
Thank you for purchasing a great product from Episode®, one of the best sounding loudspeaker lines available today. We
appreciate your purchase and are committed to providing the highest quality products possible.
OVERVIEW
This Quick Start Guide provides the basic information that is needed to install a CR-CDI1000-LSCAPE or
CR-CDI2000-LSCAPE amplifier. Refer to the Owner’s Manual provided with the amplifier for more details about the
amplifier.
PACKAGE CONTENTS
• 1x CR-CDI1000-LSCAPE or CR-CDI2000-LSCAPE amplifier
• 1x Owner’s Manual
• 1x Quick Start Guide
• 1x L+R Mono Input Adapter
• 5x Spade Lugs
• 2x 3-Conductor Phoenix Connectors
• 2x Tamper Resistant Level Knobs
CALCULATING AMPLIFIER POWER
The number of satellites or subwoofers that can be connected is determined by the amplifier’s power. As the
number of speakers increases, the power that is available to each decreases. Plan the system so that each speaker
can receive the highest level of wattage available.
NOTE: Only satellites with 70V tap settings need to be calculated. 8 Ω satellites and subwoofers do not require
calculation.
Speaker Tap
Setting (A)
CH1 Qty (B) Ch2 Qty (C) Ch1 Total
(A x B)
Ch2 Total
(A x C)
3.75W
7.5W
15W
30W
60W
Sub Total
Total Watts
NOTE: As with any 70V installation, we recommend leaving 20% of headroom, using only 80% of the rated power
of the amplifier. For the CR-CDI1000-LSCAPE this is 400W/channel, for the CR-CDI2000-LSCAPE this is 800W/
channel