Safety Information
Please read these instructions carefully before trying to install, operate, service or maintain the ZHM. The
following special notes may appear throughout the user guide (or on the equipment labels) to warn of potential
hazards or to call attention information that clarifies or simplifies a procedure for users.
Symbol
Description
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an
electrical hazard exists which will result in personal injury if the instructions are not
followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Electrical Installation
Electrical equipment should be installed, operated, serviced and maintained only by qualified personnel. No
responsibility is assumed by EpiSensor for any consequences arising out of the use of this material.
A qualified person is one who has skills and knowledge related to the construction, installation, and operation of
electrical equipment and has received safety training to recognize and avoid the hazards involved.
Installation, wiring, testing and service must be performed in accordance with all local and national electrical
codes.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
➔
NEVER work alone.
➔
Use appropriate personal protective equipment (PPE) and follow safe electrical work practices.
➔
Only qualified electrical workers should install this equipment. Such work should be performed only
after reading the entire set of installation instructions.
➔
If the equipment is not used in a manner specified by EpiSensor, the protection provided by the
equipment may be impaired.
Page 4
of 18