Channel Setup
31
VGA Grid User Guide
channel. Depending on your needs you can create new channels and configure
them.
Setting pages for the video sources from which you will record and/or broadcast
video can be accessed by clicking the channel name under the Channels section.
As long as you select a required channel node from the list, it expands the sub-menu
where the following options are available:
Channel Status
Stream Setup
Publish Stream
Video Source Setup
Files Archive
All these options are discussed below.
To create a channel, name it and assign a video source to a channel:
1.
Log in to the Web Admin interface.
2.
In the Channels pane click
Add channel
. A new channel appears in the
channels list.
Figure 17 The Add Channel Command
3.
The Video Source Setup section is displayed. Select a source from the
drop-down list near the
Use video source
field and click
Apply
. All local
and remote video sources found by the system in the network are
Содержание VGA Grid
