Physical Attributes
11
VGA Grid User Guide
Figure 4 VGA2Ethernet (rear view)
Table 3
Connector, Interface and LED Descriptions
8
Power
Connect the AC adapter to the VGA2Ethernet power
connector and to a power outlet
9
ETH1
Primary 10/100/1000 Base-T RJ-45 auto-sensing Ethernet
network port to connect the VGA2Ethernet device to an
Ethernet network. The VGA2Ethernet device Ethernet port
is auto-sensing.
10
ETH2
Secondary 10/100/1000 Base-T RJ-45 auto-sensing Ethernet
network port. This port is useful in case you need to
configure the Ethernet Bridge when there is only one
Ethernet connection.
3.2
Cables, Connectors and Adapters
The VGA Grid can be connected to a number of different types of equipment using a
variety of cables, and adapters. This section describes a subset of connectors, cables
and adapters that are known to be compatible with the VGA Grid.
3.2.1
3.5 mm Mini-jack
A 3.5mm mini jack connector is used to carry audio signals. It can be connected to
VGA Grid to its Audio In port.
Содержание VGA Grid
