Changing the Configuration from a Third-Party Application
72
VGA Broadcaster Lite User Guide
5.
Changing the Configuration from a Third-
Party Application
You can integrate a VGA Broadcaster Lite device with a third-party application,
a tool such as Wget, or a script that sends commands to the VGA Broadcaster
Lite device as URLs. You can send commands to get (and view) configuration
settings and to change configuration settings.
for the most recent updates to the API.
This chapter describes:
RS-232 commands
Syntax for HTTP API Commands
Keys for HTTP API Commands
Examples
RS-232 Commands
In addition to the On-Screen and Web interfaces, VGA Broadcaster Lite implements
an RS-232 interface, allowing easy integration with existing control room and board
room equipment.
Table 4: Serial interface commands and status reports command description
START.VGA.HIGH
Starts high-bandwidth VGA and audio recording
START.VGA.MID
Starts mid-bandwidth VGA and audio recording
START.VGA.LOW
Starts low-bandwidth VGA and audio recording
STOPS
Stops recording
STATUS
Starts reporting status changes
AUDIOSRC
Select audio source
Содержание VGA Broadcaster Lite
Страница 70: ...Web admin interface 66 VGA Broadcaster Lite User Guide ...
Страница 75: ...Viewing the Broadcast 71 VGA Broadcaster Lite User Guide Figure 23 Broadcaster Lite Remote Viewing ...
Страница 94: ...Sample Applications 90 VGA Broadcaster Lite User Guide ...
Страница 99: ...List of Figures 95 VGA Broadcaster Lite User Guide ...