epiphan VGA Broadcaster Lite, Руководство пользователя

Страница: 39 / 100

Web admin interface
35
VGA Broadcaster Lite User Guide

If the network does not have a DHCP server.

If the network does have a DHCP server but you want the VGA Broadcaster
Lite device to have a static IP address.

If the VGA Broadcaster Lite device is using the DHCP server-assigned IP
address, but you want to change the IP address. If for some reason the
DHCP server goes down you can log into the VGA Broadcaster Lite Web
admin interface and change the IP address.

If you have previously configured the VGA Broadcaster Lite device to use a
static IP address and want to change some network settings or revert back to
using DHCP.
For network changes to take effect you must reboot the VGA Broadcaster Lite device
after making the changes. See
“
Rebooting or Restarting VGA Broadcaster Lite
”
.
Note: If you change the IP address you will need to remove the VGA Broadcaster Lite
device from the Network Discovery Utility and then select Search to find it again.
Note: You can also see the VGA Broadcaster Lite MAC address on the Network
Configuration page. Providing the MAC address to your network administrator may
be helpful for managing your network.
To set the VGA Broadcaster Lite to use a static IP address
1. Log into the Web admin interface.
2. Select Network.
3. Select Use static address.
4. Enter an IP Address, Network Mask, Default Gateway, and DNS Server that
are valid for your network. Note: Clarify that this gateway setting is the
gateway of your local LAN (i.e. local router). Contact your network
administrator if you are not sure what information to use. The IP address,
Network Mask, Default Gateway, and DNS Server that you assign must be
compatible with your network.