epiphan Pearl-2 Rackmount, Руководство пользователя

Страница: 442 / 497

Pearl-2 User Guide Storage space maintenance
For example, let's say the restart setting is set to 50 and the months setting is set to 6. If six months pass and
less than 50 restarts happened, a disk check will occur on the next restart. However if you do 50 restarts in
one month, the disk check will happen after the fiftieth restart.
Disk check occurs during start up and can cause a lengthy delay in starting up the system.
To set the disk check schedule:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. Select the Disk Check link in the Configuration menu; the disk maintenance page opens.
3. Set the number of restarts to occur before the next check . Set to 0 if you don’t want to force a
disk check after a specific number of restarts.
4. Set the number of months to pass before the next check . Set to 0 if you don’t want to force a
disk check after a specific number of months.
5. Click Save .
Perform disk check
A disk maintenance schedule is used to periodically check the system storage drives for errors. If you prefer,
you can run the disk check manually at a time that is convenient for you.
Running the disk check manually resets the timers for the scheduled disk check (i.e. next check won’t happen
automatically until either the number of restarts or months passes).
If the system is recording when you start a disk check, it will stop recording and resume after the
check is complete. Frames presented during the disk check are not part of any recording.
To start a manual disk check:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. Select the Disk Check link in the Configuration menu; the disk maintenance page opens.
3. Click the Check Now button; a new page opens showing you the progress of the disk check.
Do not interrupt power to the system during the disk check.
429