epiphan Pearl-2 Rackmount, Руководство пользователя

Страница: 346 / 497

Pearl-2 User Guide Viewing with Session Announcement Protocol (SAP)
Audio and video use nearby port numbers (<port number>and <port 2>). The minimum
distance between audio and video ports must be 2.
6. Click Apply . An SDP file is generated.
7. From the channel's Status page, click the SDP file to download it. Provide the SDP file name and
location if prompted.
8. Share the file with your viewers!
Viewing with Session Announcement Protocol (SAP)
When SAP Announce is configured for a stream that uses UDP streaming, the stream is advertised over the
local network. Local viewers can view the stream using a software or hardware media player. Viewers are
presented with a list of available channels, similar to a television menu. Viewers need only click on a stream
and the video is streamed to their desktop, mobile or tablet. To configure SAP announce, go to
Stream using
multicast .
Your stream is advertised by the metadata title, if one was configured under Branding, otherwise it is
identified by its channel identifier. For a description of how to set the metadata, refer to
Add or remove
channel metadata .
When browsing from a VLC media player, streams are advertised by their channel identifier and are organized
by the group name. When browsing from an XBMC media player, streams are advertised by the stream's
metadata title (if configured), otherwise streams are advertised by their channel identifier.
1. Ensure the stream has SAP announcement enabled, otherwise, it is not advertised in the media player's
playlist.
2. Ensure the SAP announcement IP is a multicast IP address.
3.
Some media players, for example Exterity receivers, listen for SAP announcements on a
specific multicast address 239.255.255.255. If your audience is using Exterity to view your
stream, you must change the SAP announcement IP address to 239.255.255.255.
4. Launch a media player and play the streams.
a. Using VLC, click View and select Playlist. The right-hand panel indicates the playlist is empty.
b. From the side menu, click Network streams (SAP) . The playlist is populated with all streams in
your network that are SAP announcement enabled. If you specified a Group Name when you
configured the publish stream the stream will be listed in folder identified by the group name.
c. Click on a live stream in the playlist to play the stream.
333