epiphan Networked VGA Grid, Руководство пользователя

Страница: 55 / 387

Networked VGA Grid User Guide User administration
4. Start a web browser on the workstation and browse to: http://192.168.255.250/admin/
5. Log in as the administrator user with the user name admin and the admin password (by default there is
no password); the Admin panel opens.
6. Click the Networking link in the Configuration menu.
7. Select the radio button to use a static address and configure the system with a static IP address and
network settings relevant to the network being used. For specific details about the settings presented,
see
Configure network settings .
8. Restore the previously saved network configurations on the workstation.
User administration
The Networked VGA Grid has three configured users:
l
admin
l
operator
l
viewer
Each VGA Grid HD Encoder has the same three users. The user accounts are not connected and password
changes must be made to each device in the system individually.
By default, none of these users have passwords. For security purposes you should add passwords to the
admin and operator accounts.
This section describes the following user administration topics:
l
User types and privileges
l
Set or change user passwords
l
Remove user passwords
l
Overcome lost passwords
l
Configure LDAP
l
Change the logged-in user
l
Restrict viewers by IP address
User types and privileges
Networked VGA Grid's three user accounts are admin, operator and viewer. The user account names cannot
be changed and the accounts cannot be disabled. By default, none of the accounts have passwords.
55