epiphan KVM2Ethernet, Руководство пользователя

Страница: 133 / 188

7. Recording image files Setting Display Options to Change How Image Files are Recorded
User Guide Page 133
Setting Display Options to Change How
Image Files are Recorded
To change display options from the Tools menu, select Options
and then select the Display tab. The following display options
change how image files are recorded.
For more information about display options, see “Configuring
Display Options” on page 56 .
Recording Image Files
Before recording captured images as a series of image files, you
should configure image recording options (see “Configuring
Image File Recording Options” on page 129 ) and optionally
configure display format settings (see “Setting Display Options to
Change How Image Files are Recorded” on page 133 ).
To record image files
1 Connect the VGA2Ethernet device to the video source that you
want to record from and to the video capture workstation.
2 On the video capture workstation, start the VGA2Ethernet
user interface.
3 If required, select the VGA2Ethernet device.
4 Make sure the VGA2Ethernet user interface is displaying the
captured images that you want to record.
5 Select Start Recording from the Capture menu or from the
toolbar select .
Display
Format
Image files are saved with the same color depth as
the Display Format.
Limit
frame
rate to
Limit the frame rate at which image files are saved.
If the limited frame rate is higher than the frame rate
of the VGA2Ethernet device, image files are saved at
the frame rate of the VGA2Ethernet device.