Switching between auto
and manual focus
AF (auto focus):
Press to activate automatic focusing for
the LUMiO 12x lens. Prevents manual focus adjustments
when activated.
MF (manual focus):
Press to disable auto focus and allow
for manual focus adjustments (see
“Controlling your LUMIO
12x”
section of this guide).
Adjusting brightness
BLC ON/BLC OFF:
Press to activate or deactivate backlight
compensation.
/BRIGHT - :
Press and hold to increase or decrease
brightness (backlight compensation must be disabled).
QUICK REFERENCE
LUMiO 12x™
Setting presets
1. Point the remote control at the LUMiO 12x and specify
pan, tilt and zoom settings (see
“Controlling your
LUMiO 12x”
section of this guide).
2.
Using preset “1” as an example:
Press and hold the
“1”
button until the indicator light on your LUMiO 12x flashes
purple (about 4 seconds); your LUMiO 12x pan, tilt and
zoom settings are now mapped to
“1”
. Press the
“1”
button
on your remote to apply this preset to your LUMiO 12x.
Clearing presets
1.
Using preset “1” as an example:
Point the remote control
at your LUMiO 12x, press CLR PRE and then press “1”; the
preset “1” is now cleared.
To clear all presets on your LUMiO 12x:
Press and hold the
CLR
PRE
button until the power indicator light on the LUMiO 12x flashes
purple (about 3 seconds); all presets are now reset.
Setting video output resolution
and frame rate
Press and hold the desired video output button until the power indicator
light flashes purple (~4 seconds); the new frame rate and resolution is set.
