8
8a:
Press the treatment window fully against your skin on the area you want to treat.
If the skin tone sensor detects that the skin is “Not Safe” the laser will not give the
treatment.
8b:
When you have good contact with the skin, you should see a white fuzzy target
box in the center of the screen to indicate the treatment area.
8c:
When the laser is in a good position, the light around the laser button will be
orange, as shown.
8d:
Hold the laser steady against the skin and briefly press the laser button only one
time.
Gently position the hair to be treated anywhere inside the target box.
DO NOT
lift up.
You must keep full contact with the skin in order to see hair
on the screen.
The laser will emit 1 pulse.
The screen will quickly flash to let you know the treatment was successfully
delivered.
The light around the laser button will flash several times.
Target and Treat Hair
8a
8b
8c
NOTE the following when treating a hair:
If the laser button is pressed for several seconds, the laser might turn off. To turn it back on,
press and hold down the laser button for 2 seconds until the indicator light turns green.
After treatment, the hair will still be visible on the screen.
13
22
Example of hair
inside white
target box
Example of no hair
inside white
target box
Treat each hair
with only
one pulse
GETTING TO KNOW YOUR EPILASER
Screen
(A) Screen:
Connects to the laser using
the charger cable. When the laser is
touching the skin the screen helps
you locate a hair.
(B) Power Button:
Press to turn the
screen on and off.
(C) Power Adaptor:
This cable is used
to charge the screen. The small
round end is plugged into the
small hole on the top of the screen.
The other end is plugged into a
wall outlet.
(D) Stand:
Supports the screen during
treatment.
The Epilaser kit consists of 2 major components; the screen and the laser.
J
A
C
D
C
B
