www.epicstealthcam.com
4
STILL PICTURES
can be recorded in three different resolution settings. Turn on the
camera. Press the
M
to enter still picture mode. The video icon will disappear in the top
left of the LCD screen as shown here, press and hold the
S
button until
ESC
appears on the
LCD screen. Press
M
to enter resolution setting mode.
RES
will appear on the LCD screen.
Press
S
to confirm this mode selection. The still image mode has 3 resolution settings.
Three stars for High Resolution / Two Stars for Mid-resolution / One star for Low
resolution. Press
M
to scroll through the 3 resolution choices. Once you have selected the desired resolution,
press
S
to confirm the resolution setting.
To set the camera’s Burst Mode (multiple exposures) setting, press
M
following the
resolution setting above. The LCD screen will appear as shown on the right.
Press
S
to enter the Burst mode setting. Using the
M
button, select the number of images
(1-9) for sequential action shots. Press
S
to save your setting.
Example of a 3 picture burst setting screen -
Press
M
to
ESC
then
S
to exit back to still image camera mode. If you are ready to start shooting pictures,
simply press the
S
button and the camera will shoot images based on your programmed setting.
Zoom Setting
The EPIC also has the ability for 2X Zoom. To enter 2X mode, press the
M
button once from the Still Camera
screen, or twice from the Video Screen until you see only the battery icon in the top right hand corner. Press the
S
button once until an icon resembling a magnifying glass is displayed above the battery icon. This indicates
Zoom mode is activated. To return to standard wide-angle mode, press the
S
button again, and the magnifying
glass will disappear from the screen. Press
M
three times to return to video capture screen, or four times to
return to still image capture screen.
Deleting Images / Video
The
EPIC
allows you to delete video or images on the camera. From the main screen,
press the mode button until
EONE (Erase One)
appears on the screen. Press
S
to delete
the last image / video recorded in memory, or press
M
twice to return to camera mode.
