7
CUSHION ATTACHMENT
Important: All EPIC STRENGTH
™
cushions are fabri-
cated using dense plywood with tee-nuts installed for
bolting to the machine framework. Because these tee-
nuts are held by the plywood, they will not withstand
the torque that standard nuts and bolts will.
Therefore, when tightening the cushion bolts, turn
them only until they are snug and the cushion does
not move or feel loose. Overtightening may strip the
tee-nuts from the plywood and make it impossible to
remove the cushion in the future.
Adjustment Knob Diagram
Adjustment
Pin
Spring
Housing
Knob
ADJUSTMENT KNOB
If an adjustment knob sticks, it will need to be relubri-
cated. Disassemble the knob and apply a light coat-
ing of lithium grease. Reassemble the knob as shown
in the diagram. If the adjustment knob still does not
function properly, the spring may need to be replaced.
To order a new spring, refer to ORDERING
REPLACEMENT PARTS on the back cover of this
manual.