Epic CT 705 Скачать руководство пользователя страница 19

Страница: 19 / 32

HOW TO USE AN IFIT WORKOUT

To purchase iFit cards at any time, go to www.iFit.com

or call the telephone number on the front cover of this

manual. iFit cards are also available at select stores.

1. Insert the key into the console.

See HOW TO TURN ON THE POWER on page 16.

2. Insert an iFit card and select a workout.

To use an iFit workout, insert an iFit card into the

iFit slot; make sure that the iFit card is oriented so

the metal contacts are face-down and are inserted

into the iFit slot. When the iFit card is correctly in-

serted, the iFit logo will light up.

Next, select an iFit workout by pressing the iFit in-

crease and decrease buttons next to the iFit slot.

When an iFit workout is selected, the workout du-

ration, the maximum incline setting, the name, and

the maximum speed setting of the workout will ap-

pear in the displays. In addition, a profile of the

speed settings of the workout will scroll across the

matrix.

Each iFit workout is divided into several one-

minute segments. One speed setting and one in-

cline setting are programmed for each segment.

Note: The same speed and/or incline setting may

be programmed for consecutive segments.

3. Start the walking belt.

Press the Go button or the Speed increase button

to start the workout. A moment after you press the

button, the treadmill will automatically adjust to the

first speed and incline settings of the workout. Hold

the handrails and begin walking.

During the workout, the voice of a personal trainer

will guide you through the workout.

If the speed or incline setting for the current seg-

ment is too high or too low, you can manually over-

ride the setting by pressing the Speed or Incline

buttons;

however, when the next segment be-

gins, the treadmill will automatically adjust to

the speed and incline settings for the next seg-

ment.

To stop the workout at any time, press the Stop

button. To restart the workout, press the Go button

or the Speed increase button. The walking belt will

begin to move. When the next segment of the

workout begins, the treadmill will automatically ad-

just to the speed and incline settings for the next

segment.

4. Monitor your progress with the matrix and the

displays.

See step 5 on page 17.

5. Measure your heart rate if desired.

See step 6 on page 17.

6. Turn on the fan if desired.

See step 7 on page 17.

7. When you are finished exercising, remove the

key from the console.

See step 8 on page 17.

CAUTION: Always remove iFit cards from the

iFit slot when you are not using them.

iFit Slot

iFit Card

iFit Logo

Содержание CT 705

































Результаты поиска

Содержание CT 705

Отзывы:

Похожие инструкции для CT 705

Бренды по названию

Популярные бренды

Epic CT 705, Руководство пользователя

Результаты поиска

Содержание CT 705

Отзывы:

Похожие инструкции для CT 705

Бренды по названию

Популярные бренды