7
6
6. Orient the Seat Post (2) as shown.
Locate the Adjustment Knob (23) on the rear of
the Frame (1). Loosen the Adjustment Knob
and pull it outward. Then, insert the Seat Post
(2) into the Frame.
Move the Seat Post (2) upward or downward to
the desired position, release the Adjustment
Knob (23) into an adjustment hole in the Seat
Post, and then tighten the Adjustment Knob.
Make sure that the Adjustment Knob is
firmly engaged in an adjustment hole.
2
1
23
7
3
2
71
22
7. Orient the Seat (22) and the Seat Carriage (3)
as shown.
Attach the Seat (22) to the Seat Carriage (3)
with two M8 Hex Nuts (71).
Make sure that the
nose of the Seat is pointing straight ahead
before you tighten the Hex Nuts.
Locate the Adjustment Knob (23) on the Seat
Post (2). Loosen the Adjustment Knob and pull
it outward. Then, insert the Seat Carriage (3)
into the Seat Post.
Slide the Seat Carriage (3) to the desired posi-
tion, release the Adjustment Knob (23) into one
of the adjustment holes in the Seat Carriage,
and then tighten the Adjustment Knob.
Make
sure that the Adjustment Knob is firmly
engaged in an adjustment hole.
23
8
1
74
60
63
8. Attach the Water Bottle Holder (74) to the
Frame (1) with two M5 x 12mm Screws (63)
and two M5 Washers (60).
