All rights reserved. No part of this Manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying, recording or by any information storage or retrieval system, without permission in writing from the publisher.
Doc #: EC501 / Rev. 1 / Effective Date: October 17, 2014
24
5)
If the ballast material runs out during a
deployment, cut the EC. Drive the Model 800 to
the ballast stock. After re-filling the container
and continue, proceed to deploy EC from where
left off.
6)
When the deployment is finished, return the
Model 800 to storage area. Properly shut
down the Model 800.
Figure 27: Refilling the Model 800 with
ballast
Figure 28: Model 800 is returned to storage
area