EPH Controls Ireland
[email protected] www.ephcontrols.com
EPH Controls UK
[email protected] www.ephcontrols.co.uk
20180501_`TRFPi2_OpIns_JW
TRFPi2 Room Thermostat
Wireless
Operating Instructions
Page 2 of 3
Boiler
Plus
10. Factory program setting
5 / 2d
9. Setting the date, time and operating mode
Press the button once. ‘
Set Year
’ will appear on the screen.
Press the or buttons to adjust the year.
Press the ‘
OK
’ button.
Press the or buttons to adjust the month. Press the ‘
OK
’ button.
Press the or buttons to adjust the day.
Press the ‘
OK
’ button.
Press the or buttons to adjust the hour.
Press the ‘
OK
’ button.
Press the or buttons to adjust the minute. Press the ‘
OK
’ button.
Press the or buttons to adjust from 5/2d to 7d or 24h mode.
Press the button or wait 30 seconds and the thermostat will return to
normal operation.
Set
11. Adjusting the program settings for 5/2d
Press the button twice.
Programming for Monday to Friday is now selected.
Press the or buttons to adjust the P1 time. Press the ‘
OK
’ button.
Press the or buttons to adjust the P1 temp. Press the ‘
OK
’ button.
Repeat this process to adjust P2 to P6 times and temperatures.
Press the button.
Programming for Saturday to Sunday is now selected.
Press the or buttons to adjust the P1 time. Press the ‘
OK
’ button.
Press the or buttons to adjust the P1 temp. Press the ‘
OK
’ button.
Repeat this process to adjust P2 to P6 times and temperatures.
Press the button to return to automatic mode.
If 7 D mode is selected, you can program each day of the week with 6
individual times and temperatures.
If 24H mode is selected, you can only program each day of the week with the
same 6 times and temperatures.
Press the or buttons to adjust the temperature setpoint.
‘
Manual
’ will appear on the screen.
Press ‘
OK
’ or after 5 seconds the thermostat will operate in this temporary
override.
Press the button to return to automatic mode.
Set
Set
12. Temporary override (Manual)
13. Permanent override (Hold)
16. To connect the TRFPi2 thermostat to the RF1A
receiver
Mon-Fri
5/2D
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
21˚C
18˚C
21˚C
18˚C
21˚C
16˚C
21˚C
18˚C
21˚C
18˚C
21˚C
16˚C
Sat-Sun
08:00
10:00
12:00
14:00
17:30
23:00
Mon-Fri
7D
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
21˚C
18˚C
21˚C
18˚C
21˚C
16˚C
21˚C
18˚C
21˚C
18˚C
21˚C
16˚C
Sat-Sun
08:00
10:00
12:00
14:00
17:30
23:00
P1
P2
P3
P4
P5
P6
06:30
08:00
12:00
14:00
17:30
22:00
21˚C
18˚C
21˚C
18˚C
21˚C
16˚C
Everyday
24H
RF Connect
On the TRFPi2 thermostat:
Press the button. The red and green light will begin to flash.
Press the button.
The thermostat will begin to search through the RF channels.
Once an RF connection has been established the thermostat will show ‘
r01
’
on the LCD screen.
Press the ‘
OK
’ button to finish the process.
The thermostat is now connected to the RF1A receiver.
‘
RF Connec
t’ appears on the screen.
15. Adjusting the switching differential
0.4˚C
Press the ‘
OK
’ and ‘
+1hr
’ buttons for 5 seconds.
‘
H On 0.4˚C
’ will appear on the screen.
Press the or buttons to adjust from 0.2, 0.4, 0.6, 0.8 or 1˚C.
Press the ‘
OK
’ button to return to normal operation.
Connect
Please note, If you are installing a CombiPack2 the TRFPi2 thermostat and
the RF1A receiver will have a pre-established RF connection so it is not
necessary to carry out the RF connection process below.
On the RF1A receiver:
Press the ‘
+1hr
’ button for 3 seconds.
‘
Hold
’ will appear on the screen.
Press the or buttons to adjust the temperature setpoint.
Press ‘
OK
’ or after 5 seconds the thermostat will operate in this permanent
override.
Press the button to return to automatic mode.
14. +1hr Boost function
Press the ‘
+1hr
’ button once.
Press the or button to select your desired boost temperature.
Press the ‘
OK
’ button.
The thermostat will operate in this mode for one hour before returning to
automatic mode.
To cancel the boost mode at anytime, press the button or the +1hr button.
