EPH Controls RDTP, Инструкция по установке и эксплуатации

Страница: 31 / 36

29 EPH Controls Ltd.
This menu allows the installer to change the minimum and maximum
temperatures that the thermostat can be set at.
To access this setting, press and hold
& together for 5 seconds.
‘
P01
’ will appear on the screen.
Press until ‘ P02 ’ appears on the screen.
Press to select.
Use and to select ‘ ON ’.
Press to select. ‘ HI LIM ’ will appear on the screen, the
temperature will begin to flash.
Use
and to select the high limit for the thermostat.
Press to confirm. ‘ LO LIM ’ will appear on the screen, the
temperature will begin to flash.
Use
and to select the low limit for the thermostat.
Press to confirm. The settings will be saved.
Press to return to the previous screen. When this setting is
enabled, ‘ LIM ’ will appear permanently on the screen.
P02 Setting High & Low Limits
Hi 35°C Lo 5°C